Lancia Beta Forum
Technical stuff => Engine => Topic started by: raz1966 on October 19, 2011, 05:51:29 PM
-
where can i get a cambelt for my 2000 beta? is it the same as 1600?
-
No it's not. Most good motor factors will be able to get you one.
-
cheers mate
-
Usually a few on eBay.
-
Or ask Mark W to supply the whole kit. Www.lanciabetaparts.co.uk
-
Doing some trawling the internet today came up with some handy links for timing belts:
http://www.google.co.uk/url?sa=t&rct=j&q=mitsubishi+qtb123&source=web&cd=9&ved=0CG0QFjAI&url=http%3A%2F%2Fwww.adcoach.co.za%2Fcatalogues%2Fdoc_download%2F26-timing-belts-echlin&ei=IMztTvSyGMrOhAe24IWiCA&usg=AFQjCNE5vrGAfWBGf4tRjJsuOAa2keiH6Q (http://www.google.co.uk/url?sa=t&rct=j&q=mitsubishi+qtb123&source=web&cd=9&ved=0CG0QFjAI&url=http%3A%2F%2Fwww.adcoach.co.za%2Fcatalogues%2Fdoc_download%2F26-timing-belts-echlin&ei=IMztTvSyGMrOhAe24IWiCA&usg=AFQjCNE5vrGAfWBGf4tRjJsuOAa2keiH6Q)
http://www.autoraid.ru/catalog/files/DAYCO_Cross_All.xls (http://www.autoraid.ru/catalog/files/DAYCO_Cross_All.xls)
Interestingly theres no listing for a 1" wide belt with the same tooth profile and 148 teeth.
So if you're ever struggling to find a belt here are the cross references, all for standard 19mm wide belts
2.0 148 Tooth
A E AUTOPARTS TB122
BANDO 148ZA19
BOSCH 9144161148
COLMANT CUVELIER 148R190
CONTINENTAL 55LA075
CONTINENTAL 5921
CONTINENTAL 6585921
CONTINENTAL CT652
DAYCO 148S190
F MOGUL TRW 48-17522
FAI AUTOMOTIVE 41148
FIAT 4201738
FIAT 4201739
GATES 5022
GEMINI D8052
GOODYEAR 148LH190
GOODYEAR 2455420
HAVAM VS9101
HUTCHINSON 148AX3/4"
HUTCHINSON 41148X3/4"
HUTCHINSON 555LA075
KLEBER 1148190
LUCAS KCB115
MITSUBOSHI 148ZA19
MOTAQUIP VTB122
OPTIBELT 41148X3/4"
QUINTON HAZELL QTB123
ROULUNDS 148TP190
SEAT GC01201200
SEAT GC01201201
SEAT X042017390
UNIPART GTB1022
UNIROYAL 41148X3/4"
1.8 146 Tooth
A E AUTOPARTS TB113
BANDO 146ZA19
BOSCH 1987949030
BOSCH 9144161146
COLMANT CUVELIER 091R190
COLMANT CUVELIER 146R190
CONTINENTAL 547LA075
CONTINENTAL 5918
CONTINENTAL 6565918
CONTINENTAL CT649
DAYCO 146S190
F MOGUL TRW 48-17505
FAI AUTOMOTIVE 41146
FIAT 4164869
FIAT 4182426
GATES 5005
GEMINI D8051
GOODYEAR 146LH190
GOODYEAR 2454620
HAVAM VS9098
HUTCHINSON 146AX3/4"
HUTCHINSON 41146X3/4"
HUTCHINSON 547LA075
KLEBER 1.146.190
LUCAS KCB104
MITSUBOSHI 146ZA19
MOPROD MTB11
MOTAQUIP VTB105
OPTIBELT 41146X3/4"
QUINTON HAZELL QTB110
ROULUNDS 146TP190
SEAT FC01201202
SEAT FC01201203
SEAT X041648690
SEAT X041824260
UNIPART GTB1005
UNIROYAL 41146X3/4"
1.4 144 Tooth
A E AUTOPARTS TB112
BANDO 144ZA19
BOSCH 1987949029
BOSCH 9144161144
COLMANT CUVELIER 144R190
CONTINENTAL 2631540075
CONTINENTAL 540LA075
CONTINENTAL 5920
CONTINENTAL 6585920
CONTINENTAL CT651
DAYCO 144S190
F MOGUL TRW 48-17504
FAI AUTOMOTIVE 41144
FIAT 4152329
FIAT 4182415
FIAT 4182425
GATES 5004
GEMINI D8050
GOODYEAR 144LH190
GOODYEAR 2454220
HAVAM VS9095
HUTCHINSON 144AX3/4"
HUTCHINSON 41144X3/4"
HUTCHINSON 540LA075
KLEBER 1144190
LUCAS KCB103
MOPROD MTB10
MOTAQUIP VTB104
OPTIBELT 41144X3/4"
QUINTON HAZELL QTB109
UNIPART GTB1004
UNIROYAL 41144X3/4"
-
Interestingly theres no listing for a 1" wide belt with the same tooth profile and 148 teeth.
there is a Renault belt with the same teeth count but nearly 1 inch wide not sure if it has same teeth profile as beta though anyone know?
dayco 94600 http://dayco.universalautomotive.com/uploads/2009/09/Technical-Information-019-_09_GB-VOLVO-KTB185.pdf (http://dayco.universalautomotive.com/uploads/2009/09/Technical-Information-019-_09_GB-VOLVO-KTB185.pdf)
-
Interestingly theres no listing for a 1" wide belt with the same tooth profile and 148 teeth.
Guy Croft can supply 1 inch wide belts for the twin cams.
-
yes but us sad cases like to know more!
-
The Dayco 94600 belt is for a Volvo S40 and has a rounded tooth form similar to the later Fiats and most other late car manufacturers - this design is better than the "square" early design on the Beta - the belt does not stick in the notches of the pulley as it goes round.
I too have yet to find the mythical 1" belt, and I have contact with a few belt suppliers in my line of work...
Merry Christmas!!!!!
-
Chaps
Once again no mystery involved just pick up the phone and ring Guy Croft he does not bite unless of course you want to "Slap a Turbo on it Mate". As he is an ex chief engineer from a Turbo engineering business he tends to have no time at all for reckless stupidity. However he will support mere mortals trying their best to get it right and why spend loads of time trying to find something someone far better inforned has already sourced?
Cheers
Eric
-
Some of us are just anoraks and just like to know stuff in some cases this can save cash too but agreed not in this case
-
Eric,
I'm buying a load of bits and or work from Guy at the moment. In fact I spoke to him today. I could just ask about the belt but where's the fun in that?
Anyway the main point of the post is that I now have just about every reference for the standard belts I'm ever going to need!
Stuart