Lancia Beta Forum

Technical stuff => Transmission => Topic started by: glovebeast on December 29, 2012, 04:56:46 PM

Title: Inboard CV joint re-assembly
Post by: glovebeast on December 29, 2012, 04:56:46 PM

I've removed the in-board CV joint in order to replace both inner and outer boots. There is a washer that goes on the splined shaft before the CV joint; Haynes and the Fiat manuals just describe it as a washer, but mine are dished.
1. is this correct
2. if so, which way should it face?
TIA

Steve

BTW car is a Volumex HPE

Title: Re: Inboard CV joint re-assembly
Post by: WestonE on December 30, 2012, 09:46:01 AM

The dome should be towards the joint it is just putting some spring load into the assembly to stop it shuttling on the spline.

Eric

Title: Re: Inboard CV joint re-assembly
Post by: glovebeast on December 31, 2012, 12:04:43 PM

Thanks Eric - I'll re-assemble later today

Happy New Year!!