Lancia Beta Forum

Technical stuff => Body => Topic started by: lukasdeopalenica on May 07, 2013, 02:27:56 PM

Title: coupe/hpe doors adjusting
Post by: lukasdeopalenica on May 07, 2013, 02:27:56 PM

Is the striker plate or rather a striker bolt adjustable? I tried to slacken it but failed. I did not forced it. How to make my doors deeper closed to flush the body?

Title: Re: coupe/hpe doors adjusting
Post by: Ammy on May 07, 2013, 06:59:48 PM

Both the "bolt" and the receiver onthe pillar are adjustable.

Title: Re: coupe/hpe doors adjusting
Post by: lukasdeopalenica on May 08, 2013, 08:42:22 AM

There is only a bolt as a striker/receiver in my hpe :/

Title: Re: coupe/hpe doors adjusting
Post by: Ammy on May 08, 2013, 10:40:54 AM

Sorry,  got it the wrong way round but H.P.E is oviously different to the Spyder

Title: Re: coupe/hpe doors adjusting
Post by: Ammy on May 08, 2013, 10:42:34 AM

Pillar photo.

Title: Re: coupe/hpe doors adjusting
Post by: lukasdeopalenica on May 09, 2013, 07:39:31 AM

Thanks. I meant the pillar striker and only this can be adjusted, what eventually I did.

Title: Re: coupe/hpe doors adjusting
Post by: Neil-yaj396 on May 09, 2013, 05:21:54 PM

Yes, the bolt like pin on the body can be undone and adjusted. After my OS sill was replaced the door kept popping when I went over a major bump. Moving the pin inwards has largely cured this.