Author Topic: Steering damper bracket  (Read 5609 times)

0 Members and 1 Guest are viewing this topic.

Offline MattNoVAT

  • Legendary Member
  • ******
  • Posts: 1830
Steering damper bracket
« on: September 21, 2012, 05:50:29 PM »
Hi Alan,

Can you confirm that this part number is the same for all S1, S2 and S2/FL Betas that were fitted with the manual steering rack? 

RHD cars with TRW rack:  82310302    (Even though my parts book says the RHD manual rack is made by ZF !!)

Seems that LHD cars had two different makes of manual rack - so I would have to get confirmation from someone with both types that the damper bracket is interchangeable.

LHD cars with TRW rack:    82347363
LHD cars with ZF rack:       82347361

Cheers

Matt
1981 2000 Coupe S2/FL
1976 1600 Coupe S1
2007 Ypsilon 1.3 Bi-Colori

Offline rossocorsa

  • Legendary Member
  • ******
  • Posts: 2593
  • Country: 00
Re: Re: Steering damper bracket
« Reply #1 on: September 21, 2012, 09:32:58 PM »
will try to check tomorrow

Sent from my MOMO11 bird using Tapatalk 2

Offline rossocorsa

  • Legendary Member
  • ******
  • Posts: 2593
  • Country: 00
Re: Steering damper bracket
« Reply #2 on: September 22, 2012, 11:25:47 AM »
my parts books specifies
damper 82321319
ser 1 82308220 trw lhd
ser 1 82310302 trw rhd
ser 1 82313044 zf lhd this one indicates berlina and hpe only


damper 82321319
ser 2 82347363 lhd  ( note part is shown as modified 02/1979)
ser 2 82310302 rhd
there is no distinction between rhd and lhd given but the zf rack is again shown as berlina/hpe only but no bracket is listed

damper 82321319
ser 2 fl 82347363 trw lhd
ser 2 fl 82347361 zf lhd
ser2 fl 82310302 zf rhd

I suspect my s2fl parts book is missing an update to correct the zf rack error!

apologies but i am still temporarily unable to access the microfiche I have s2fl and s2fl2 fiche so will check those as soon as I can

Offline MattNoVAT

  • Legendary Member
  • ******
  • Posts: 1830
Re: Steering damper bracket
« Reply #3 on: September 22, 2012, 01:16:10 PM »
Hi Alan,

So both the damper and damper bracket are consistent through the evolution of the RHD range.

Thats perfect thanks!
1981 2000 Coupe S2/FL
1976 1600 Coupe S1
2007 Ypsilon 1.3 Bi-Colori

Offline rossocorsa

  • Legendary Member
  • ******
  • Posts: 2593
  • Country: 00
Re: Steering damper bracket
« Reply #4 on: September 22, 2012, 01:24:52 PM »
it seems so but as with everything about Betas the info is a bit confusing, will try to check the microfiche in case of any differing info for later models