Brake pipe alignment pins

[smithymc]

Does anyone know of a source for these?

They look to be 3mm dia with a full length ‘slot’ although its quite hard to be sure judging from the remains. None of.mine are really good enough to re use.

Thanks in anticipation.

Mark

[peteracs]

Hi Mark

I bought some similar split spring type pins on Ebay for the yoke to callipers when I reassembled them. My replacement brake hoses did not have the locating holes, so simply cut the ones off the callipers.

Sorry no idea on size at this point.

Peter

[Nigel]

Good day,

They are a standard 'roll pin'.
I'd measure the size and order through ebay. Use the caliper hole to measure with a drill bit.
They only ensure orientation of the hose i.e. prevent rotation.  

You should be able
to get the correct length, although a little shorter won't do
any harm. So long as they protrude plus minus 4mm from the caliper
they'll work well.

Regards
Nigel

[smithymc]

Brilliant - thanks. Amazing how much more easy it is to find things when you know what the things are called!

All measured and ordered.

Mark