Author Topic: VX Coupe resto  (Read 1022 times)

0 Members and 1 Guest are viewing this topic.

Offline lancialulu

  • Sr. Member
  • ****
  • Posts: 188
VX Coupe resto
« on: December 14, 2025, 05:39:45 PM »
Hi all

You may have seen a flurry of wanted items appearing.

That's because I have finally got ex Peter Watcham's VX Coupe back from tinwork and paint..... In the scheme of things it wasn't that long at the restorers - but long enough!

I am very happy with their work and the paint finish Alumino Metalisze is just how I wanted it - the fleck is almost indiscernible.

So all I have managed to do since the car was returned was fit the rear bumper....

Now I have to sort through the many boxes to refurb, rebuild, and replace.

Offline Ferrit

  • Hero Member
  • *****
  • Posts: 835
  • Country: gb
  • Mark Ferris
Re: VX Coupe resto
« Reply #1 on: December 31, 2025, 12:11:40 AM »
I love silver cars.  I will never have a black car again, and would rather not red (as all my Beta's have been red) so when looking for Beta Coupe's one I almost bought was black and one i actually bought was red :-/

So whats the next job?
Lancia Beta Coupe 2000 SA import, now project
VW Caravelle t5.1 was project
Merc EQA

Offline lancialulu

  • Sr. Member
  • ****
  • Posts: 188
Re: VX Coupe resto
« Reply #2 on: December 31, 2025, 12:49:12 PM »
I had to give the car back to the paint shop for a couple of minor bits they missed so will crack on in the New Year.

Headlights are causing a bit of head scratching  - what do folk use for late series  (not LED....)?? I bought some flat face hella units but they seem to protrude too much...

Offline peteracs

  • Administrator
  • Legendary Member
  • *****
  • Posts: 4824
  • Country: gb
  • Peter Stokes
Re: VX Coupe resto
« Reply #3 on: December 31, 2025, 04:11:39 PM »
I had to give the car back to the paint shop for a couple of minor bits they missed so will crack on in the New Year.

Headlights are causing a bit of head scratching  - what do folk use for late series  (not LED....)?? I bought some flat face hella units but they seem to protrude too much...

Hi Tim

If you mean the ones used on the Capri and early 3 Series BMW, then I used them on the Spider and had to modify the rear metal cups where the wires come in to allow the plastic cups to fit. If you want to go that router send me a PM. Apart form that I do like them as that rear cup provides a nice seal for the wires.

Peter
Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600

Offline lancialulu

  • Sr. Member
  • ****
  • Posts: 188
Re: VX Coupe resto
« Reply #4 on: May 27, 2026, 09:55:17 AM »
Long time no post!

18 months after it last turned over, I was ready after 6 months mechanical rebuilding and refitting the body shell to fire up the VX and drove out of my workshop for a well deserved wash down.

Lots mor to do but I feel a major milestone has been achieved. Coundn't have got here without the great support of this forum!

Offline WestonE

  • Legendary Member
  • ******
  • Posts: 1973
  • Country: gb
Re: VX Coupe resto
« Reply #5 on: May 27, 2026, 10:27:51 AM »
A great car looking fantastic. Well done.

Offline Ferrit

  • Hero Member
  • *****
  • Posts: 835
  • Country: gb
  • Mark Ferris
Re: VX Coupe resto
« Reply #6 on: May 27, 2026, 03:29:09 PM »
Dam that a mighty fine looking car.  Love it
« Last Edit: May 27, 2026, 03:37:05 PM by Ferrit »
Lancia Beta Coupe 2000 SA import, now project
VW Caravelle t5.1 was project
Merc EQA

Offline Nigel

  • Legendary Member
  • ******
  • Posts: 1333
  • Country: gb
Re: VX Coupe resto
« Reply #7 on: May 27, 2026, 05:14:34 PM »
I concur with the others. That's looking brilliant.

I hope to see it soon!

N.
1984 2.0 Carb HPE [ex Aus] Grigio Finanza.
2007 Mazda 6 2.3 [current daily, highly recommended]
The past:
1980 2.0 HPE White in South Africa [hope it survives!]
1976 1.6 Coupe Lancia Blu [PFG 76R] [probably deceased]
oh,and an Uno Turbo 1997 also in SA [stolen,never recovered]

Offline Clifford

  • Sr. Member
  • ****
  • Posts: 203
Re: VX Coupe resto
« Reply #8 on: May 27, 2026, 07:48:54 PM »
Looking brilliant!
Excellent job.
C

Offline lancialulu

  • Sr. Member
  • ****
  • Posts: 188
Re: VX Coupe resto
« Reply #9 on: May 27, 2026, 08:53:04 PM »
Thank you all for your compliments. This car belonged to a very dear friend of mine from new. Sadly he passed away a few years ago and the family asked me to try to sell it - no takers.

For some unknown reason I made them an offer (too high in hindsight). Maybe it was a completely unmolested car (apart from an ignition switch burn out - now sorted), or maybe it is the coupe of choice and I like coupes...

I won't tell you how much the metal/paint cost but that's water under the bridge so to speak.

As I am the 2nd owner and have a full history file this car is a keeper!

Offline Ferrit

  • Hero Member
  • *****
  • Posts: 835
  • Country: gb
  • Mark Ferris
Re: VX Coupe resto
« Reply #10 on: May 27, 2026, 10:15:19 PM »
Do you have a previous thread of all the work before it came back?  I realise now that a nirvana is a one owner unmolested car.  Next one for sure
Lancia Beta Coupe 2000 SA import, now project
VW Caravelle t5.1 was project
Merc EQA

Offline lancialulu

  • Sr. Member
  • ****
  • Posts: 188
Re: VX Coupe resto
« Reply #11 on: Today at 03:31:36 PM »
Do you have a previous thread of all the work before it came back?  I realise now that a nirvana is a one owner unmolested car.  Next one for sure

Sorry it was too embarrassing - thinking it was essentially rust free was a bit naïve. But at least now I know I have a rust free car....