Author Topic: Back with a Beta  (Read 15726 times)

0 Members and 1 Guest are viewing this topic.

Offline holmesgr001

  • Full Member
  • ***
  • Posts: 63
Back with a Beta
« on: September 19, 2015, 07:24:33 PM »

I joined the group when I bought a 1975 beta coupe. I bought it unsighted and after I got it home realized its was too far gone(rust).
Good news is I have just bought a 1982 beta coupe 1600. This one I drove home.
More pics to come


Sent from my iPhone using Tapatalk

Offline rossocorsa

  • Legendary Member
  • ******
  • Posts: 2589
  • Country: 00
Re: Back with a Beta
« Reply #1 on: September 19, 2015, 09:10:22 PM »
Unusual colour is it a Seat built example?

Offline holmesgr001

  • Full Member
  • ***
  • Posts: 63
Re: Back with a Beta
« Reply #2 on: September 20, 2015, 09:19:16 AM »
Hi Rossocorsa
Looks like the original colour was a metallic blue. Built by TAK in South Africa.  I will definitely have it re spayed. Undersided on the colour though. So far I have change the back left break caliper from the scrap lancia I had and am waiting for a mechanic to helicoil one of the plugs on the head, then I can take it for a run. It's been 22 years since my last drive in a Beta


Sent from my iPhone using Tapatalk

Offline holmesgr001

  • Full Member
  • ***
  • Posts: 63
Re: Back with a Beta
« Reply #3 on: September 20, 2015, 09:22:17 AM »

The only plate on it



Sent from my iPhone using Tapatalk

Offline rossocorsa

  • Legendary Member
  • ******
  • Posts: 2589
  • Country: 00
Re: Back with a Beta
« Reply #4 on: September 20, 2015, 11:25:45 AM »
Do you have a pic of the TAK chassis plate as well? Always interesting to see this quirky stuff. I think it will have been built or at least the CKD kit assembled well before 82.
I think the current colour is  good on a coupé even if not original

Ah I see your  note that this is the only plate, I think that will have been assembled in Italy. Build date is January 1981
« Last Edit: September 20, 2015, 11:34:07 AM by rossocorsa »

Offline holmesgr001

  • Full Member
  • ***
  • Posts: 63
Re: Back with a Beta
« Reply #5 on: September 20, 2015, 02:37:27 PM »

This is the plate off the older model beta.


Sent from my iPhone using Tapatalk

Offline TreviDash

  • Sr. Member
  • ****
  • Posts: 152
Re: Back with a Beta
« Reply #6 on: September 22, 2015, 12:37:13 PM »
I'm quite sure that is a Beta colour.  My father had a 1976 Berlina identical to the Autocar cover car that year


'84 Alfa 33 Gold Cloverleaf
'92 Daimler Six

Offline holmesgr001

  • Full Member
  • ***
  • Posts: 63
Re: Back with a Beta
« Reply #7 on: September 23, 2015, 05:25:47 PM »
Ok so I've replaced a leaking water pump. But the compression test shows that there is something wrong with cylinder 2 and 3. Less than 2bar from each. I was kinda expecting that. So the question now is- do I rebuild the 1600 or the 2000 I have from my previously scrapped beta.


Sent from my iPhone using Tapatalk

Offline holmesgr001

  • Full Member
  • ***
  • Posts: 63
Re: Back with a Beta
« Reply #8 on: September 23, 2015, 05:28:47 PM »
Anyone out there replaced a 1600 with a 2000. Anything unexpected I should know about.


Sent from my iPhone using Tapatalk

Offline holmesgr001

  • Full Member
  • ***
  • Posts: 63
Re: Back with a Beta
« Reply #9 on: September 23, 2015, 05:34:05 PM »



Sent from my iPhone using Tapatalk

Offline holmesgr001

  • Full Member
  • ***
  • Posts: 63
Re: Back with a Beta
« Reply #10 on: September 23, 2015, 05:34:59 PM »
Pics of the interior


Sent from my iPhone using Tapatalk

Offline peteracs

  • Administrator
  • Legendary Member
  • *****
  • Posts: 4778
  • Country: gb
  • Peter Stokes
Re: Back with a Beta
« Reply #11 on: September 23, 2015, 06:06:48 PM »
Only issue I can think of is final drive on 1600 is lower than 2000. So you may wish to change that as well to improve high speed cruising unless you want improved acceleration. P


Sent from my iPhone using Tapatalk
Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600

Offline holmesgr001

  • Full Member
  • ***
  • Posts: 63
Re: Back with a Beta
« Reply #12 on: September 23, 2015, 06:59:20 PM »
I have both gearboxes, so will use the box from the 2l


Sent from my iPhone using Tapatalk

Offline rossocorsa

  • Legendary Member
  • ******
  • Posts: 2589
  • Country: 00
Re: Back with a Beta
« Reply #13 on: September 23, 2015, 07:04:19 PM »
I'm quite sure that is a Beta colour.  My father had a 1976 Berlina identical to the Autocar cover car that year




Pre face lift for that colour on a coupé

Offline holmesgr001

  • Full Member
  • ***
  • Posts: 63
Re: Back with a Beta
« Reply #14 on: October 02, 2015, 05:27:20 AM »
So head off today, could this 1600 be a 2000?


Sent from my iPhone using Tapatalk

Offline holmesgr001

  • Full Member
  • ***
  • Posts: 63
Re: Back with a Beta
« Reply #15 on: October 02, 2015, 05:27:48 AM »



Sent from my iPhone using Tapatalk

Offline peteracs

  • Administrator
  • Legendary Member
  • *****
  • Posts: 4778
  • Country: gb
  • Peter Stokes
Re: Back with a Beta
« Reply #16 on: October 02, 2015, 11:16:17 AM »
Hi

What does it say stamped above the oil filter?

Peter
Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600

Offline rossocorsa

  • Legendary Member
  • ******
  • Posts: 2589
  • Country: 00
Re: Back with a Beta
« Reply #17 on: October 02, 2015, 01:36:40 PM »
with the head off simply measure the stroke

Offline holmesgr001

  • Full Member
  • ***
  • Posts: 63
Re: Back with a Beta
« Reply #18 on: October 02, 2015, 03:07:35 PM »
Stroke is 90mm do definitely a 2000. The head is now at the engineer. Now it's to run around and try find gaskets


Sent from my iPhone using Tapatalk

Offline peteracs

  • Administrator
  • Legendary Member
  • *****
  • Posts: 4778
  • Country: gb
  • Peter Stokes
Re: Back with a Beta
« Reply #19 on: October 02, 2015, 03:28:54 PM »
Plenty on Ebay over here usually, though maybe more difficult in SA?

Peter
Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600