Author Topic: Cracked dash  (Read 6696 times)

0 Members and 1 Guest are viewing this topic.

Offline echobravo

  • Newbie
  • *
  • Posts: 6
  • HPE 2.0 i.e. and Beta Coupe 2000
Cracked dash
« on: June 18, 2010, 10:13:10 PM »
Anyone out there have any advice on just how to go about repairing cracks on the dash. I have an otherwise brilliant condition interior in my '76 coupé, bar three relatively small cracks. I have seen lots of repair kits and services but would like to hear from anyone who has experience with this...
ECHOBRAVO
Beta Coupé 2000 1976 x 3 | HPE 2.0. i.e. 1984 | Flavia 2000 Coupé 1969 x 3 | Fulvia Coupé 1.3s Rallye 1969 | Fulvia coupé 1.3s 1973

Offline Neil-yaj396

  • Legendary Member
  • ******
  • Posts: 2075
  • 1979 1300 Coupe
Re: Cracked dash
« Reply #1 on: June 19, 2010, 11:22:19 AM »
Mine is exactly the same and I have thought about having a go with brown silicone filler (the type that comes in trigger tubes), but this is difficult to rub down once set. For the moment I have decided to leave it. At the end of the day the dash material has been hardened by the sun and was probably too hard in the first place - modern dash material tends to be either slightly rubbery (in quality cars) or very hard (and plasticy in cheap cars). The dashes probably creaked like mad until they cracked.

Offline HFStuart

  • Legendary Member
  • ******
  • Posts: 2096
  • Country: gb
Re: Cracked dash
« Reply #2 on: June 19, 2010, 11:42:15 AM »
I looked into this on my first spider and was told it wasn't suitable for repair - the very thin skin over a foam type base was the problem.

That said the cracks in mine were pretty extensive so you may have more luck. I ended up getting mine covered by an upholsterer which looked pretty good.

Lancia Services Cape town have told me they have a New Old Stock dash but that it will need a good clean to bring it back to life. I'm not quite sure what that means but it might be worth a gamble.

Can you post up some pictures of your little collection  - especialy the Flavia 2000 coupes?

Offline echobravo

  • Newbie
  • *
  • Posts: 6
  • HPE 2.0 i.e. and Beta Coupe 2000
Re: Cracked dash
« Reply #3 on: June 19, 2010, 09:42:28 PM »
I will take some more pics of my work in progress flavia 2000 injection...

I have now decided to go the full hog with the beta coupé 1976 and do a proper restoration now - I love this one. The engine is coming out on Monday.
I have spoken to auto trimmers in Maritzburg who claim to be able to fix the cracked dash - I will post any progess.
ECHOBRAVO
Beta Coupé 2000 1976 x 3 | HPE 2.0. i.e. 1984 | Flavia 2000 Coupé 1969 x 3 | Fulvia Coupé 1.3s Rallye 1969 | Fulvia coupé 1.3s 1973